The Garic Powered Compact Wheel Wash has been designed with small, low-volume traffic and ‘no-space’ projects in mind. The unit also lends itself to urban developments where space is a premium, where muck is a problem, and where traditional wheel wash solutions are too large.
|Bays||Dims (L x W x H)||Dims (L x W x H) Without Ramps|
|1||8500mm x 4500mm x 325mm||2500mm x 4500mm x 325mm|
|2||11000mm x 4500mm x 325mm||5000mm x 4500mm x 325mm|
|3||13500mm x 4500mm x 325mm||7500mm x 4500mm x 325mm|
|Min Hire||4 weeks|
This unit is especially designed for site specification vehicles such as tipper trucks and vehicles without front and rear under-run restrictions, however, ramp extensions are available for these lower configurations.
Garic’s Enviro Wheel Wash Compact is designed to enable quick deployment without the need for movement orders and to be set up onsite with as little disruption as possible. This unit is the smallest powered spray wash product in our range. Its submersible pump can either be plugged in to an existing three-phase supply or powered independently of mains power using a diesel-powered generator. Please note that a 25mm water supply is required to give the unit its initial fill. This also maintains the water level within the unit. Waste water is minimised as it is automatically recirculated from the containing sump beneath.
The unit can be dug into the ground down to only 325mm for a flush-fit application and, if digging is not an option, the unit can also be used 325mm above ground using a set of 3-metre rumble ramps. As wheels pass through the unit, the rumble bars agitate the tyre treads and which are then cleaned using high-pressure spray jets. This process ensures a 360° clean of standard tipper lorry tyres. Its outstanding design means that travelling very slowly through the unit achieves a clean similar to our much larger units.