Wheel Spinner
The Wheel Spinner from Garic is the only cleaning system that can remove clay, mud and stones from between the rear driven wheels of lorries. Sometimes, simply washing the wheels is not effective enough and often leaves heavy mud, clay and stones stuck dangerously between the twin rear wheels of these vehicles.
The portable Dry Wheel Spinner from Garic is simple to use. The vehicle operator simply drives the lorry’s rear wheels onto the four spinners and disengages the unit’s brakes via the lever adjacent to the cab window. This allows the spinners to roll. The operator then runs the wheels up to 25+ mph and continues until the wheels are cleared of debris. 10 seconds is usually sufficient. The centrifugal force created, and tread opening action of the spinner ensures that this debris passes down into the catch pit, and not onto the road, following vehicles or pedestrians.

During use, the spinner automatically recharges its inbuilt air brake tank, which provides braking force for locking the spinner to facilitate an easy exit.

It is the driver’s responsibility to clean lorry wheels thoroughly before leaving site, and a responsible site’s duty to make relevant provisions to facilitate this. This will ensure a clean and safe environment, avoiding any road accidents, pedestrian injuries and property damage caused by debris from site.

The Wheel Spinner has removable central grids to allow easy access for cleaning. This is can be achieved by using a vacuum unit, excavator or manual dig. The unit is laid into a dug-in preformed box with a sloping floor that allows debris to ‘fall-out’ from under the unit to be excavated or vacuumed away when required. The unit can also be used above ground but will require ramps and structural fabrication.

Features & Benefits

Totally self-sustaining
No need for electric
No need for water
Easy and quick to install
Extremely heavy duty build to withstand any vehicle
Vehicles can drive through at up to 30 mph
Heavy duty air brake system
Heavy duty rollers with welded ribs for opening the treads during spinning
Easy maintenance (lubrication once a week)
Unit Name Wheel Spinner
Diameter of roller 320mm with a 10mm gauge steel
Brake disk 280mm in Diameter